HTL 225/230-240 50W - 225W , 12V

HTL 225/230…240   50…225W - 12V

Plasați cursorul peste o imagine pentru a mări

136.23 Lei
(TVA inclus)
in stoc
+
HTL 225/230

HTL 225/230-240 50W - 225W , 12V  

 

Electrical data
Lamp wattage 50…225 W
Line current 0.90 A 
 
 
Input voltage DC 176…275 V
Nominal voltage 230…240 V
Power factor λ 0.95 
 
 
Operating frequency 50 kHz 
 
 
Nominal output voltage 11.6 / 11.7 V 
 
 
Input voltage AC 207…264 V
Mains frequency 50…60 Hz
System wattage 230.00 W
Input voltage range 230…240 V
Max. ECG no. on circuit breaker 10 A (B) 11
Galvanic isolation primary/secondary 4.00 kV 
 
 
Max. ECG no. on circuit breaker 16 A (B) 18
ECG efficiency 95 % 
 
 
Inrush current 1.5 A 
 
 
Dimensions & weight
Length 170.0 mm
Width 44.0 mm
Height 34.0 mm
Cable cross-section, input side 2.5 mm² 
 
 
Cable cross-section, output side 4.0 mm² 
 
 
Wire preparation length, input side 14 / 8.0 mm 
 
 
Wire preparation length, output side 14 / 8.0 mm 
 
 
Mounting hole spacing, length 140.0 mm
Product weight 225.00 g
Temperatures & operating conditions
Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 80 °C
Additional product data
Design / version Long with cable clamp
Capabilities
Dimming method Trailing- or leading-edge phase control for inductive load dimmers
Overload protection Automatic switch off, reversible
Overheating protection Automatic switch off, reversible
Short-circuit protection Automatic switch-off, reversible
Max. cable length to lamp/LED module 2.0 m
Cable/wire types, input side H03VV-F 2x0.50 / H03VV-F 2x0.75 / H03VVH2-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 mm²
Cable/wire types, output side H03VV-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x1.5 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 / NYM-J 3x2.5 mm²
Dimmable Yes

Product features 

  • Line frequency: 50…60 Hz
  • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Safety: to EN 61347
  • Short-circuit protection, overload protection, overtemperature protection: electronically reversible
  • Electrical isolation between the primary side and the secondary side
  • Energy efficiency: ≥ 91 % (according to ErP regulation 2012/1194/EC)
  • Dimmable on the leading edge and trailing edge

Product benefits 

  • Very low power loss thanks to high efficacy
  • Through-wiring possible on the primary side
  • Large temperature range
  • Protective operation throughout the entire partial-load range for long lamp life
  • High efficiency

Areas of application 

  • Effect and accent lighting
  • Living rooms
  • Object lighting
  • Conference rooms
  • Restaurants
  • Recessed and surface-mounted furniture luminaires
  • Shop lighting
  • Event rooms

Nici o postare găsită

Scrie un comentariu