PT FIT 35/220-240 S POWERTRONIC

PT-FIT 35/220…240 S

Plasați cursorul peste o imagine pentru a mări

84.09 Lei
(TVA inclus)
in stoc
+
PT FIT 35

PT FIT 35/220-240 S POWERTRONIC

Electrical data  
Lamp wattage 39 W
Line current 0.19 A 
Ignition voltage 4.5 kVp
Operating frequency 0.200…0.240 kHz
System wattage [AGGR] 43.00 W
ECG efficiency 0,92
Input voltage AC 198…264 V
Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Power factor λ 0.95 
Inrush current 30 A 
Max. ECG no. on circuit breaker 10 A (B) 15 
Max. ECG no. on circuit breaker 16 A (B) 26 
Max. no. of ECGs on 16A MCB with EBN-OS 65 
Protective conductor current 0.3 mA
U-OUT (working voltage) 250 V
Max. working voltage between LH and LL 250 V
Max. working voltage betw. LL/LH & earth 250 V
Max. capacitance of wire ECG/lamp 120 pF
Dimensions & weight  
Length 110.0 mm
Width 75.0 mm
Height 30.0 mm
Mounting hole spacing, length 99.0 mm
Mounting hole spacing, width 64.0 mm
Cable cross-section, input side 0.5…1.0 / 0.5…1.5 mm² 
Cable cross-section, output side 0.5…1.0 / 0.5…1.5 mm² 
Wire preparation length, input side 8.5…9.5 mm
Wire preparation length, output side 8.5…9.5 mm
Product weight 245.00 g
Colors & materials  
Casing material Metal
Temperatures & operating conditions  
Ambient temperature range -15…+65 °C
Maximum temperature at tc test point 85 °C
Lifespan  
ECG lifetime 30000 h 
Additional product data  
Design / version Built-in unit
Capabilities  
Max. cable length to lamp/LED module 1.5 m
Overheating protection Power reduction and switch off at T > 85 °C at the tc point
ECG reset time > 0.5 s
Dimmable No
Restriction on ignition time 20 min
Suitable for fixtures with prot. class I
Certificates & standards  
Approval marks – approval VDE / VDE-EMC / EAC / C-Tick
Type of protection IP20
EEI – Energy Label A2
Standards Acc. to EN 61347-2-12/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547

Product family benefits

  • Optimized cost/benefit factor
  • Compact dimensions and low weight for small luminaire designs
  • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)

Areas of application

  • Shop lighting
  • Health and fitness areas (in luminaires with protection class IP66 or higher)
  • Effect and accent lighting

Product family features

  • Energy Efficiency Index EEI: A2
  • Supply voltage: 220…240 V
  • Line frequency: 50…60 Hz
  • RI suppression: to EN 55015/CISPR 15
  • Safety: to EN 61347-2-12
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547