QTI 4X18W/220-240 DIM

QTI 4X18/220-240 DIM

Plasați cursorul peste o imagine pentru a mări

191.92 Lei
(TVA inclus)
in stoc
+
QTI 4X18/220-240 DIM

  QTI 4X18W/220-240 DIM   

 

 

Electrical data
Input voltage AC 198…264 V
Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage DC 154…276 V
Operating frequency 40…100 kHz
Max. no. of ECGs on circuit breaker 10 A 12  
Max. no. of ECGs on circuit breaker 16 A 19  
Inrush current 35 A
Light technical data
Starting time 0.6 s 
Dimensions & weight
Length 360.0 mm
Width 40.0 mm
Height 21.0 mm
Mounting hole spacing, length 350.0 mm
Product weight 401.00 g
Wire preparation length, input side 8.0…9.0 mm 
Wire preparation length, output side 8.0…9.0 mm 
Cable cross-section, output side 0.5…1.5 / 0.5…1.0 mm² 
Cable cross-section, input side 0.5…1.5 / 0.5…1.0 mm² 
Temperatures
Ambient temperature range -20…+50 °C
Lifespan
ECG lifetime 100000 h 
Capabilities
Dimming interface 1…10 V
Dimming range 1…100 % 
Dimmable Yes
Overload protection Automatic switch off, reversible
Overheating protection Power reduction and switch off at T > 75 °C at the tc point
Suitable for fixtures with prot. class I

 

Product benefits

  • Same luminous flux with direct and alternating current
  • Perfect lamp start for applications with motion sensors
  • Dimming of amalgam lamps without flickering or reduced lifespan
  • Very high efficiency thanks to cut-off technology
  • Automatic restart after lamp replacement
  • ECGs comply with MINERGIE standard due to very low standby consumption
  • Configurable emergency power characteristics

Areas of application

  • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
  • Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Suitable for luminaires of protection class I

Product features

  • Control via 1…10 V interface
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Dimming range: 1…100 % luminous flux
  • Lamp start: within 0.6 s
  • Lifetime: > 100,000 h (for T = 65 °C at Tc)
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Energy Efficiency Index EEI: A1 BAT
  • Overtemperature protection: Thermal management at high tc temperatures

Nici o postare găsită

Scrie un comentariu