LumiSplit 2.10 Ethercon

Plasați cursorul peste o imagine pentru a mări

Pre-comanda
Stoc furnizor
DMX zone selection: Yes (per output) HTP/LTP merger: Yes DMX backup mode: Yes Regeneration mode: Yes RDM discoverable: Yes RDM filtering:...
  • DMX zone selection: Yes (per output)
  • HTP/LTP merger: Yes
  • DMX backup mode: Yes
  • Regeneration mode: Yes
  • RDM discoverable: Yes
  • RDM filtering: Yes (per input and output)
  • DMX port isolation: Optical and galvanic isolation per port
  • Short circuit protection: Yes
  • DMX port termination/biasing: Yes
  • Dark mode: Yes
  • User presets: 2
  • Lockable front panel: Yes
  • DMX input:
    • 2x Shielded Neutrik Ethercon connectors (front)
    • 2x Shielded Neutrik Ethercon connectors (rear/thru)
  • DMX output: 10x Shielded Neutrik Ethercon connectors
  • Power connectivity: 1x Neutrik powerCON TRUE1 In/Out
  • Power input: 100-240V AC; 16A; 50-60Hz
  • Power output: Maximum 15A
  • Power consumption: Maximum 15W
  • Fuse: Not user-serviceable fuse
  • Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
  • Power status indication: 1x RGB LED and LumiNet Monitor
  • Input status indication: 2x RGB LED and LumiNet Monitor
  • Output status indication: 10x RGB LED and LumiNet Monitor
  • Mounting: Rack
  • Enclosure: Robust metal housing
  • Dimensions (W x D x H): 482 x 204,85 x 44 mm (19" x 8" x 1,73")
  • Weight: 2,54 kg
  • Packaging: 530 x 330 x 80 mm (21" x 13" x 3,15")
  • Environmental:
    • Operating temperature: 0 to 50°C
    • Storage temperature: -10 to 70°C
    • Humidity (non condensing): 5 to 95%
  • Certificates/Approvals: cSGSus Mark, CE, CB certificate
  • Standards: IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55022, EN 55024
  • Product codes: LU 01 00044-ETH (LumiSplit 2.10 Ethercon)
Poate că te interesa si